Chapter 36: Static Routing; Configure The Multilink Router A At Site A - Avaya 1000 Series Configuration Manual
Secure router
Hide thumbs
Also See for 1000 Series:
- Reference (700 pages) ,
- Manual (570 pages) ,
- Hardware installation and maintenance (262 pages)
Table of Contents
Advertisement
Chapter 36: Static Routing
All Secure Routers support IP routing utilizing static routes. The following diagram shows a remote Secure
Router "A" connected over an MLPPP bundle to the main Secure Router "B". Secure Router B in turn
routes to the customer router.
Figure 41: IP Routing
The customer router Ethernet 0 IP address is 200.1.1.1 255.255.255.0, and the IP route is 198.1.1.0
255.255.255.0 200.1.1.2 2.
Configure the Multilink Router A at Site A
Multilink_Router_A> configure term
Multilink_Router_A/configure> interface ethernet 0
Multilink_Router_A/configure/interface/ethernet> ip addr 200.1.1.2 24
Multilink_Router_A/configure/interface/ethernet> exit
Multilink_Router_A/configure> interface bundle wan1
Multilink_Router_A/configure/interface/bundle> link t1 1
Multilink_Router_A/configure/interface/bundle> encap ppp
Multilink_Router_A/configure/interface/bundle> ip addr 10.1.1.2 255.255.255.252
Multilink_Router_A/configure/interface/bundle> exit
Multilink_Router_A/configure> ip route 0.0.0.0 0.0.0.0 10.1.1.1 1
Avaya Secure Router 1000 Series Configuration Guide
December 2010
243
Advertisement
Table of Contents
Troubleshooting
