Configuring An Ebgp Session Between An Avaya Router And A 3Rd Party Router - Avaya 1000 Series Configuration Manual

Configuring BGP Features
CONFIGURATION OF Avaya2:
interface
link t1 4
encapsulation ppp
ip address 40.40.40.2 255.255.255.0
exit
router bgp 200
neighbor 40.40.40.1 100
The above configuration should bring up an EBGP Session between Avaya1 and Avaya2.
Avaya1> show ip bgp summary
BGP neighbor is 40.40.40.2, peer group is BgpExternal
Remote AS 200, local AS 100, Group Type is External
BGP version 4, local router ID 60.60.60.5, remote
router ID 60.60.60.2
Current state = Established, up for 00:01:36
Last state = OpenConfirm, last event = RecvKeepAlive
Last error = None (subcode : None)
Configured Hold time is 180 seconds, keepalive interval
is 60 seconds
Active Holdtime is 180 seconds, keepalive interval is
60 seconds
Maximum prefixes is set to 50000 (warning : 41500)
Current number of prefixes from this neighbor is 0
Received 2 messages (19 bytes), 0 notifications, 0
updates
Sent 3 messages (67 bytes), 0 notifications, 0 updates
Connections established 1
Connection state is ESTABLISHED
Local host: 40.40.40.1, Local port: 179
Foreign host: 40.40.40.2, Foreign port: 1801
Avaya2> show ip bgp summary
Configuring an EBGP Session between an Avaya Router and a 3rd
Party Router
CONFIGURATION OF Avaya1:
interface
link t1 4
encapsulation ppp
ip address 30.30.30.1 255.255.255.0
exit
300 Avaya Secure Router 1000 Series Configuration Guide
bundle ToAvaya1
bundle To3rdPartyRouter
December 2010