Chapter 30: OSPF Routing Protocol - Frame
The following example shows OSPF running between a Secure Router 1000 Series and a router over a
serial T1 link with back-to-back Frame Relay.
Figure 30: OSPF Over a Single T1 with Frame Relay
Configuring the host name
SR> configure terminal
SR/configure> hostname SR
Configuring interface ethernet 0
SR/configure> interface ethernet 0
SR/configure/interface/ethernet0> ip address 10.10.10.1
24
SR/configure/interface/ethernet0> exit
Avaya Secure Router 1000 Series Configuration Guide
Relay
December 2010
199