Avaya 1000 Series Configuration Manual page 130

NAT Configurations
Table 28: Variable definitions
Variable
<global-ip>
<pool-name>
<private-ip>
The following table shows the settings for the firewall ALGs if the enable-all command is
used.
Firewall ALG Name
sip Session initiation protocol UDP Port 5060
sip-tcp Session initiation
protocol
msn Microsoft Networs
Messenger
gatekeeper Micosoft
NetMeeting H323-
Gatekeep(server to server)
msgudp Microsoft Gaming
Zone
tftp Trivial file transfer
protocol
rpc Remote Procedure call
dns Domain Name Service
n2p Net2Phone private
protocol
pcanywhere Norton/
Symantec's pcanywhere
protocol
130 Avaya Secure Router 1000 Series Configuration Guide
The global IP address for the pool.
The identifying name for the pool.
The private IP address for the pool.
Protocol and Port
Number
TCP Port 5060
TCP Port 1863
UDP Port 1719
UDP Port 47624
UDP Port 69
UDP Port 111
UDP Port 53
UDP Port 6801
UDP Port 5632
Value
Default Factory
Setting
Enabled
Enabled
Works with
MSN client to
Enabled version 7.0
Unusual use
case for H323
trunkingthroug
Disabled h NAT
Disabled
Enabled
Enabled
Unusual use
case – DNS
Server on the
private side
missing
needed CLI
Disabled configuration
Old version,
n2p protocol
mostly
replaced by
SIP even in n2p
Disabled clients
Rare use case
Disabled version 5.0.0
Notes
December 2010