Avaya 1000 Series Configuration Manual page 34

TCP MSS Clamping
interface ethernet <port number>
3. To specify the tcp-mtu of the Ethernet interface, enter:
ip tcp-mss <value>
4. To exit the Ethernet configuration mode, enter:
exit
Configuring TCP MSS on Existing PPP Bundle Interface
1. To enter the configuration mode, enter:
configure terminal
2. To select the bundle interface, enter:
interface bundle <name>
3. To specify the tcp-mtu of the interface, enter:
ip tcp-mss <value>
4. To exit the bundle configuration mode, enter:
exit
Configuring TCP MSS on an Existing Frame Relay Bundle PVC Interface
1. To enter the configuration mode, enter:
configure terminal
2. To select the bundle interface, enter:
interface bundle <name>
3. To specify Frame Relay configuration, enter:
fr
4. To select the PVC interface, enter:
pvc <pvc-number>
5. To specify the tcp-mtu of the interface, enter:
ip tcp-mss <value>
6. To exit the Frame Relay PVC configuration mode, enter:
exit
7. To exit the Frame Relay configuration mode, enter:
exit
8. To exit the bundle configuration mode, enter:
exit
34 Avaya Secure Router 1000 Series Configuration Guide December 2010