XYZ Printing da Vinci Jr. 1.0 User Manual page 20

Function Description :
●
Select "Import" on the device to select the graphic file you wish to engrave.
Select "Edit". The software screen shall display the laser engraver settings.
●
The user may choose between Vector / Pixel engraving modes (default software setting is
Vector mode).
Set engraving speed, number of engraving layers, contour detection sensitivity, or color depth
detection sensitivity.
Pause and cancel the laser sculpting
●
PAUSE:Select "PAUSE" to pause the laser engraving process.
RESUME:To cancel the pause and resume the printing, select "RESUME".A screen will appear to confi rm whether
to resume the engraving process. Select "YES" to continue the laser engraving process.
CANCEL: To cancel the laser engraving job, select "CANCEL". A screen will appear to confirm
whether to cancel the engraving process. Select "YES" to cancel the laser engraving process.
Laser Specification
●
Laser
450nm+5nm/-10nm InGaN
Wavelength
Laser Power for
Class 3B
Classifi cation
Engraving area 15 x 15 cm / 5.9" x 5.9"
Mode of
CW (Continuous Wave)
Operation
For more details on laser engraving settings and methods,
please refer to the "Laser Engraving Module User Manual".
SELECT MODULE
Once basic editing has been completed, select this "Engrave" icon.
Alternatively, select this "Advanced Engraving Settings" icon to
complete advanced settings before engraving.
"Language" and "Automatic Feedback" (feedback laser
engraving settings) settings.
da Vinci
Laser Power 350mW ± 10%
Beam Diameter ≦ 1mm
File Types JPG / PNG / GIF / BMP
April 2016
Ver.1
P 20