XYZ Printing da Vinci Jr. 1.0 User Manual page 16

Scanning takes around 5 minutes. During scanning, the object on the turntable revolves
in a clockwise direction. Throughout the process, the laser modules projects linear beam
at the object while the camera on the module films a complete image sequence of the
rotating object. When scan is finished, XYZscan then converts the images captured into a
triangulated mesh.
3D laser scanner at the
right sides
360 degrees automatic
rotating platform for
scanning
Scan with XYZscan
●XYZscan
Install XYZscan on the PC before scanning. Installer can be found in bundled Software CD
and at XYZprinting website: http://support.xyzprinting.com/en/Support/download
Scanning is always activated with XYZscan. With the software, you may also edit/save the
scan and send the object for printing.
B C D E F
A
H
G
SCANNING
da Vinci
Set scan mode based on the color of the object.
A
Light: for light-shaded (e.g. white) objects
Normal: for objects with colors that are not easily classified
Dark: for dark-shaded (e.g. brown) objects
B Start to scan: Activate scanning
Import 3D model files: Import .das fi le for
C
editing or import ".stl".
D Scan again with current setting: Re-scan with
the same settings.
E Select model quality and save to file :Save
the scan as .das/.stl.
F
Print model: Send the scan to XYZware for printing.
G
Adjust XYZscan settings:Language setup/Calibration.
Information abour XYZscan:Info/Software
H
and firmware updates.
April 2016
Ver.1
P 16