Setup; Checking The Tire Pressure; Checking The Engine-Oil Level; Checking The Transaxle-Fluid Level - Toro 34215 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
4
Media and Additional Parts
Description
Operator's Manual
Key
1

Checking the Tire Pressure

No Parts Required
Procedure
Front and Rear Tire Pressure: 83 to 97 kPa (12 to 14 psi)
1. Check the air-pressure in the front and rear tires.
2. If the air-pressure in the tires need adjustment, inflate
the tires to 83 to 97 kPa (12 to 14 psi).
2

Checking the Engine-Oil Level

No Parts Required
Procedure
The engine is shipped with oil; check the engine-oil level and,
if necessary, add to the appropriate level. Refer to
the Engine-Oil Level (page 20)
specification.
Description
No parts required
Checking
for instructions and the oil
Qty.
–
Qty.
1 Read before operating the machine.
2 Start the machine.
3
Checking the Transaxle-Fluid
Level
No Parts Required
Procedure
Transaxle Oil Type: Toro® HYPR-OIL™ 500 hydraulic
fluid or Mobil® 1 15W-50
The Transaxle is shipped with fluid; check transaxle-fluid level
in the expansion tank, and if necessary, add to the appropriate
level; refer to Servicing the Transaxle (page 61)
13
Use
Connect the battery.
Use