Maintaining The Sprayer System; Check Sprayer System; Cleaning; Cleaning The Engine And The Exhaust System Area - Toro 34215 Operator's Manual

Maintaining the Sprayer
System

Check Sprayer System

Service Interval: Every 50 hours
1. Shut off the engine, set the parking brake, remove the
key, and wait for all moving parts to stop before leaving
the operating position.
2. Check all of the hoses, nozzles, and fittings for damage
and leaks.
Note: Replace all damaged or leaking sprayer
components.
3. Check the nozzle strainers and in-line strainers for
accumulation of dirt and chemical sludge.
Note: Clean or replace strainers with an accumulation
of dirt and chemical sludge.

Cleaning

Cleaning the Engine and the
Exhaust System Area
Service Interval: Before each use or daily (may be required
more often in dry or dirty conditions.)
CAUTION
Excessive debris around engine-air intake and
exhaust system area can cause engine, exhaust
area, and hydraulic system to overheat which can
create a fire hazard.
Clean all debris from engine and exhaust system
area.
1. Shut off the engine, set the parking brake, remove the
key, and wait for all moving parts to stop before leaving
the operating position.
2. Clean all debris from screen next to the starter grip of
the engine, around engine shrouding, fuel tank, and
exhaust system area.
3. Wipe up any excessive grease or oil around the engine
and exhaust system area.
4. Clean muffler-heat shields of all debris, dirt, and oil.
Removing the Engine Shroud
and Cleaning the Cooling Fins
Service Interval: Every 80 hours
1. Stop the engine, set the parking brake, remove the key,
and wait for all moving parts to stop before leaving the
operating position.
2. Remove cooling shroud from engine.
3. Clean cooling fins of the engine.
Note: Also clean dust, dirt, and oil from external
surfaces of engine which can cause improper cooling.
4. Install the cooling shrouds onto the engine.
Note: Operating the engine without cooling shrouds
will cause engine damage due to overheating.
Cleaning the Debris from the
Machine
Service Interval: Before each use or daily
1. Shut off the engine, set the parking brake, remove the
key, and wait for all moving parts to stop before leaving
the operating position.
63