Oneida Air Systems 5 & 7.5 HP Direct Drive Cyclonic Dust Collectors Owner's Manual page 7

V. Angle Iron Stand
1. Choose the system orientation, plenum can be on the right or the left of the cyclone.
Bolt together the stand using the cross bars and 3/8" x 1" bolts. Note: the cross bar on
the cyclone stand goes in the back so that the dust bin can slide out.
6
Cross Brace for
Cyclone Angle Ring
to sit on
5 - 7.5 HP Direct Drive Owner's Manual
c
O.A.S. 2002