Table of Contents
Advertisement
Patch tab
A-61849/ISIS January 2016
The Patch tab provides the following options.
Patch Confirmation Tone — the confirmation tone may be used to
signal that a patch has been recognized by the scanner. The default is
no confirmation tone.
Action when Patch is detected — the scanners provide an option that
allows you to use a set of Scanner Control patches. These patches are
new patch patterns numbered from 10 -15 and are reserved for
automatically controlling features of the scanner by inserting patch
pages into the batches of paper during document preparation. For
example, you may have a job that requires that you scan envelopes
that contain the pages you are scanning. The envelopes trigger a
multifeed that is slowing down your scanning throughput. To avoid this,
you can use the Action when patch is detected option in the scanning
application to select one of the Scanner Control patches and assign the
Turn Off Multifeed – For One Sheet option. If, for example, you select
a Patch Type 10 you could insert a Patch 10 sheet in front of the
envelopes to prevent the scanner from triggering a multifeed.
55
Advertisement
Table of Contents
