Table of Contents
Advertisement
56
Select one of the following when a patch is detected:
• Turn Off Multifeed – For One Sheet: disables multifeed detection
for the page following the patch that is used to trigger this feature.
• Turn Off Multifeed – Between Patches: toggle a multifeed detection
off until another patch of the same kind is read. This feature can be
used if there is a group of documents together in the batch that would
trigger an undesired multifeed event.
• Stop Scanning: stops scanning at specific point in a batch of
documents. This option can be used if there is a change needed in
the way the documents are scanned. For example, if you are
scanning business documents at 200 dpi but there are some photos
included in the batch that must be scanned as high resolution (i.e.,
600 dpi color images), you can insert a Stop Scanning patch in the
batch just before and after the photos to stop the scanner to change
the resolution. You could also print instructions on the patch pages to
indicate what change needs to be made.
NOTE: Scanning applications (e.g., Kodak Capture Pro Software)
can also embed data on the Stop Scanning patch page to
automatically make a change to the scanner settings and
restart scanning thereby totally automating any required
change.
A-61849/ISIS January 2016
Advertisement
Table of Contents
