Table of Contents
Advertisement
If you select Automatic, the scanner will analyze the documents to
produce the best possible image.
Automatic - advanced is for advanced users that want to further adjust
this option. Use the Aggressiveness slider bar to adjust the extent at
which the color balance is determined. Values range from -2 to 2.
Sharpen — increases the contrast of edges within the image.
• None
• Normal
• High
• Exaggerated
Streak Filter — allows you to configure the scanner to filter vertical
streaks from your images. Streaks are lines which may appear on an
image and are not part of the original document. Streaks may be
caused by contaminants on your documents (e.g., dirt, dust or frayed
edges) or by not following the recommended cleaning procedures for
your scanner. Adjust the extent at which the streaks are filtered by
moving the slider bar from -2 to 2. The default is 0.
A-61849/ISIS January 2016
21
Advertisement
Table of Contents
