Table of Contents
Advertisement
A-61849/ISIS January 2016
Action when paper jam occurs — allows you to select what happens
when the scanner detects a paper jam.
• Stop Scanning: scanning will stop and control will return to the
scanning application (e.g., ends the job). Verify that the paper path
has been cleared and restart the scan session from the scanning
application.
• Pause Scanning: if you want to automate the jam recovery option,
selecting Pause Scanning will cause scanning to stop but the
scanning application will be waiting for additional images (e.g., stops
the feeder). This option will allow you to recover from a document jam
faster, thus improve operator efficiency. When you clear the paper
path, scanning can be resumed by pressing the Start/Pause button
on the Operator Control Panel. Scanning can be stopped by pressing
the Stop button on the Operator Control Panel or via the scanning
application.
Power Saver — allows you to set the amount of time the scanner
(1 to 240 minutes) will remain inactive before the scanner goes into an
idle state. The default is 15 minutes.
Power Off — allows you to set the amount of time, in minutes, the
scanner has to be in power saver mode before it automatically turns off.
35
Advertisement
Table of Contents
