Table of Contents
Advertisement
42
Digital Stamp — turns digital printing on for the physical sheet of
paper.
• Mode
- Disabled
- Front Side — turns digital printing on for all front images.
- Back Side — turns digital printing on for all rear images.
- Both
NOTES:
• Digital stamp is applied to the image after it has been cropped and
rotated. Therefore, if Front Side and Back Side are both enabled,
the print may be printed on different edges of the document.
• Digital stamp is applied before Image Merge so if Back Side is
enabled, the digital print will be printed on the merged image twice.
Offset from Edge — select a value to determine how far the printed
information will appear from the edge.
• Top Margin: select a value for the distance from the leading edge of
the document.
NOTES:
• Printing automatically stops 6.3 mm (1/4-inch) from the trailing
edge of the document even if the information has not been
completely printed.
• The horizontal print position is determined by the location of the
ink cartridge in the scanner. See the User's Guide for information
about setting print positions.
• This option is only available when printing on the physical sheet of
paper.
• The offset from the lead edge may also be overridden from the
scanner's Operator Control Panel.
• Image's Top: select a value for the distance from the top edge of the
image.
• Image's Left: select a value for the distance from the left edge of the
image.
NOTE: The Image's Top and Image's Left options are only
available when digitally printing on images.
A-61849/ISIS January 2016
Advertisement
Table of Contents
