Table of Contents
Advertisement
40
• Interactive Multifeed Recovery: scanning will stop but the scanning
application will be waiting for additional images (i.e., stops the
feeder). Images of the multifed document will be displayed on your
computer. You can accept these images or rescan to replace them.
You can make your selection on your computer or the scanner. Send
the images to your application and resume scanning by selecting
Accept. Selecting Rescan will discard the images and scanning will
resume. Scanning may be stopped by selecting Stop.
NOTE: Put the multifed document(s) into the input elevator before
selecting Rescan.
Play sound on PC — turn this option on if you want the PC to make a
sound when a multifeed is detected.
NOTE: The sound on the PC may not occur at the exact time the
multifeed is detected by the scanner.
Speaker icon — displays the Open dialog box allowing you to select
the desired tone (.wav file) for your alarm.
Calibrate — displays the Calibration window allowing you to perform a
UDDS calibration.
NOTE: Frequent calibration is not necessary or recommended. Only
perform a calibration when instructed to do so by your support
personnel.
A-61849/ISIS January 2016
Advertisement
Table of Contents
