Table of Contents
Advertisement
54
Feature Patch Codes — these patch types can be used by the host for
post-scan image control (they are not used for image addressing). For
example, use these patch types for changing between black and white
and color/grayscale imaging or workflow control.
Feature Patch Type 1
Feature Patch Type 4
(Do not use these patches for production - they are not to spec)
Feature Patch Type 6
Confirmation Tone — the confirmation tone may be used to signal that
a patch has been recognized. The default is no confirmation tone.
Patch Readers — select the icon that corresponds to the physical
patch reader location in the scanner. Select one, two, three or four
patch readers.
PR1 - indicates the left patch reader.
PR2 - indicates the left center patch reader.
PR3 - indicates the right center patch reader.
PR4 - indicates the right patch reader.
(Do not use these patches for
production - they are not to spec)
image addressing - disabled
(Do not use these patches for
production - they are not to spec)
A-61849/ISIS January 2016
Advertisement
Table of Contents
