Table of Contents
Advertisement
32
Maximum Length — select a value that indicates the length of the
longest document in your document set.
NOTES:
• Not all combinations of settings are supported at the larger lengths
(i.e, resolution, color, grayscale, etc.). For greater flexibility, the
scanner will not generate an error until it sees a document whose
length is not supported.
• The scanner's throughput may be reduced for larger lengths.
• If a document that is longer than this value is scanned, the transport
will stop (leaving the document in the scanner) and a document jam
message will be displayed.
• The Maximum Length will always range from 2.5 to 180 inches but
the true maximum length of the scan will depend on the bit depth
(color/grayscale/black and white and the resolution used for the
scan). Black and white 200 dpi will be 180 inches, but color 600 dpi
will be much less. If the scanner's processing capacity is exceeded
before the user-selected Maximum Length is reached, then a
document jam will be displays on the scanner's Operator Control
Panel and the image will not be sent to the host application.
• If scanning a stack of mixed documents, where some documents are
very long, the best option may be to select when to enable Long
Document scanning by using either the Allow Maximum Length
override or the Maximum Length Detection batch override option on
the scanner's Operator Control Panel.
• When Controlled Dual Stacking is enabled, the default setting will
be limited to the maximum length of 10 inches/254 mm. See Chapter
5, "Length Protection Enabled" in the User's Guide for more
information.
A-61849/ISIS January 2016
Advertisement
Table of Contents
