Table of Contents
Advertisement
A-61849/ISIS January 2016
Presets — you can use the selections in the field to automatically fill in
the Format String field. The options are:
• Custom: enter your desired values.
• None
• Fixed: Address
• Level 3: Address%3L%2L%1L
• Level 2: Address%2L%1L
• Level 1: Address%1L
• Level 3 Offset: Address%3L%2L
• Level 2 Offset: Address%2L
You can have no fixed field or enter any fixed field value. The default
fixed field value is Address.
Counters — for each image address level enter a Start Value, Width
and make a Level to Follow Level selection.
• Start Value: the start value is reflected in the image address in the
field designed by the format string.
• Width: a value of 0 indicates that no image address level will be
used. Widths cannot exceed 9 characters.
• Level to Follow: these are the rules the scanner follows to set the
next image address level if there are no other inputs. For example,
patch sheet or end of batch processing. You will have to define a
level to follow level for each of the level fields you defined in your
image address.
NOTE: The total value of the Width column plus the number of
characters in all fixed fields cannot exceed 27 characters.
Format — select the format of the image address string used by the
printer and how it is displayed on the scanner's Operator Control Panel.
The following choices are available for printing the counter format.
• Display Leading Zeros format (e.g., 0009). This is the default.
• Suppress Leading Zeros format (e.g.,
• Compress Leading Zeros format (e.g., 9)
9)
51
Advertisement
Table of Contents
