Table of Contents
Advertisement
26
• Content: images will be considered blank based on the document
content within the image. Select Black and White, Grayscale or
Color to choose the maximum amount of content that the scanner
will consider to be blank. Any image that has more content than this
value will be considered non-blank and will be given to the scanning
application. The values range from 0 to 100 percent.
NOTE: Blank Image Detection by Content has been improved in
Scanner Firmware 3.12.1 (and higher) to allow better
detection of pages with very little text. The improved feature
can determine differences between just a few characters on a
page. Because the feature is more sensitive, you may need
to increase the value for percentage content if you find that
images are being deleted that you do not want to delete. For
example, a setting of 5% would equate to 12-13% with the
improved feature.
Learn Content — allows the scanner to determine the content amount
based on the documents to be scanned. Click Learn to use this
function.
NOTE: Learn mode cannot be applied to both the front and back sides
simultaneously. You must select the side you want to configure.
A-61849/ISIS January 2016
Advertisement
Table of Contents
