YM-063A
24. Install the resonator into the rubber mounts on the
chassis; then secure to the manifold using a new gas-
ket and three new caps screws and nuts. Tighten to
16 ft-lb. Connect the oxygen sensor and install the
spring securing the resonator to the chassis.
YM-033A
25. Install the gas tank assembly and connect the battery;
then install the upper and lower console making sure
to connect the reverse alarm.
26. Install the drive clutch, drive belt, and the driven
clutch.
27. Install the seat and secure using the screw.
NOTE: On the LXR models, connect the seat heater
harness connector.
28. Install the hood and both access panels.
0747-529
63