Arctic Cat Pantera 3000 Service Manual page 156

13. Secure the front left-side facia to the chassis using
the existing torx-head screws.
14. Secure the front heat shield using the existing
torx-head screws; then secure the coolant return hose
(A).
PC229A
15. Install the intercooler, air bypass valve, and the air
duct as an assembly into the four mounting brackets.
16. Secure the outlet hose, air duct, and intercooler using
the existing clamps (A); then install the air filter (B)
and all hoses connected to the intercooler.
SNO-231A
17. Connect the oxygen sensor; then install the cap
screws, nuts, new gasket, and spring securing the
resonator to the chassis.
PC227
NOTE: Check the coolant level and the oil level.

Add as necessary (see the Fuel Systems section).
18. Install the right- and left-side panels; then install the
hood.
155