Steering Pole; Fuel Tank Cap - Sea-doo 2006 3D RFI Operator's Manual

Table of Contents

Advertisement

The warning light will turn on whenev-
er there is a problem with the engine
management system. It will blink
when there is a problem with the
TM
O.T.A.S.
system or the electric bilge
pump.
NOTE: When engine is not running
and safety lanyard is on its post, the
warning light will remain turned on un-
til safety lanyard is removed.

7) Steering Pole

In "vert" configuration, the steering
pole can be moved up and down while
driving to suit various riding position.
1. Steering pole
Steering pole weight is reduced at the
handlebar by the action of a return
spring. You may want to change the
weight feeling at the handlebar, there
is an adjustment for that purpose. If
you install or remove the "moto" seat,
you may want to readjust the spring
tension.
______________________
34
1. Return spring
2. Adjustment
3. To reduce weight at handlebar
4. To add weight at handlebar
Ensure to adjust handlebar to the de-
sired position before use. Refer to
HANDLEBAR ADJUSTER.

8) Fuel Tank Cap

Unscrew the cap counterclockwise.
After fueling, reinstall cap and fully
tighten.
WARNING
Always stop the engine before re-
fueling. Fuel is flammable and ex-
plosive under certain conditions.
Always work in a well ventilated
area. Do not smoke or allow open
flames or sparks in the vicinity. Fu-
el tank may be pressurized, turn
cap slowly when opening. Never
use an open flame to check fuel
level. When fueling, keep water-
craft level. Do not overfill or top
off the fuel tank and leave water-
craft in the sun. As temperature
increases, fuel expands and might
overflow. Always wipe off any fuel
spillage from the watercraft. Peri-
odically verify fuel system.

Advertisement

Table of Contents
loading

Table of Contents