Maintenance Chart; Periodic Inspection - Sea-doo 2006 3D RFI Operator's Manual

MAINTENANCE CHART

Periodic Inspection

Routine maintenance is necessary for all mechanical products. A periodic inspec-
tion contributes to the product's life span.
The following maintenance chart gives guidelines for regular watercraft servicing
scheduled to be performed by you and/or by an authorized Sea-Doo dealer. The
schedule should be adjusted according to operating conditions and use.
IMPORTANT: Schedule for watercraft rental operations or higher number of hour
use, will require greater frequency of inspection and maintenance.
The maintenance is very important, if you are not familiar with safe service prac-
tices and adjustment procedures, see your authorized Sea-Doo dealer.
NOTE: Some items are included in the PRE-OPERATION CHECKS and not nec-
essarily repeated in this chart.
A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
T: PROCEED WITH TASK
PART/TASK
GENERAL
Lubrication/corrosion protection
ENGINE
Support and rubber mount
Seals and fasteners
Exhaust system fasteners
(5)
RAVE valve
Top end (leak test, piston and ring clearance)
Counterbalance shaft oil level
(5)
Spark plug
(5)
Ignition timing
COOLING SYSTEM
Flushing
Hose and fasteners
Engine drain tubes
Air intake silencer fit/tightness
______________________
74
PERIODIC MAINTENANCE CHART
T
(5)
(5)
FIRST 10 HOURS
25 HOURS OR 3 MONTHS
50 HOURS OR 6 MONTHS
(1) T
I I
I I
I I
C C
(4)
T
I I
I R
(4)
T
(3)
T
I I
(1)
I
I I
100 HOURS OR 1 YEAR
TO BE PERFORMED BY
LEGEND
(1) Every 10 hours in salt water
Operator
use.
Dealer
Dealer
Dealer
Dealer
(5) Emission-related component.
(4) Check at 350 hours or 5 years.
Dealer
Dealer
Dealer
Dealer
Operator
(1) Every 10 hours in salt water
use.
Dealer
(3) Daily flushing in salt water
or foul water use.
Operator
Dealer