Table of Contents
Advertisement
Storage Tray
Referring to the above illustration, that
area is a convenient tray to store per-
sonal articles. The tray is designed
to receive the "Safety equipment for
small vessel kit" (sold separately).
Tool Kit
Tool kit is located in storage tray. It in-
cludes tools needed to perform basic
watercraft maintenance.
10) Oil Injection Reservoir
Cap
Remove engine cover to expose oil
reservoir cap. Lock steering pole with
the holder.
WARNING
Always install steering pole holder
immediately after engine cover re-
moval to support the pole securely
while working in the engine com-
partment.
1. Oil injection reservoir cap
To add injection oil in the reservoir, un-
screw the cap counterclockwise. Do
not overfill.
Reinstall cap and fully tighten.
Do not overfill. Reinstall cap and
fully tighten. Oil is flammable. Al-
ways wipe off any oil spillage from
the bilge.
Unlock steering pole and secure its
holder.
Reinstall engine cover and relatch.
11) Air Intake Opening
Allows air into the bilge for ventilation
purposes and engine supply. If the air
intake opening is kept under water,
water will get inside the bilge under
certain circumstances.
CAUTION: If the air intake open-
ing is kept under water, such as
when turning constantly in tight cir-
cles, water will get inside the bilge,
which may cause severe damage to
internal parts of the engine.
12) Bow and Stern Eyelets
Eyelets can be used for mooring or as
a tie-down points during trailering.
Bow Eyelet
1. Bow eyelet
Stern Eyelet
These eyelets can be used for tie-
down purposes.
_____________________
WARNING
37
Advertisement
Table of Contents
