Oil Strainer Cleaning; Coolant Replacement - Can-Am outlander 400 series Operator's Manual

Oil Strainer Cleaning

The oil strainer must be cleaned every
200 hours or every 2 years or every
6000 km (3730 mi).
Contact an authorized Can-Am ATV
distributor/dealer.

Coolant Replacement

WARNING
In order to avoid potential burns,
do not remove the radiator cap or
loosen the coolant drain plug if the
engine is hot.
Open the access panel and remove
the radiator cap.
1. Radiator cap
On the right side of vehicle, remove
the engine cover.
Unscrew the coolant drain plug and
drain the coolant into a suitable con-
tainer.
_____________________
122
1. Coolant drain plug
NOTE: Do not unscrew the coolant
drain plug completely.
Disconnect the engine temperature
sensor connectors, then unscrew the
bleeding screw on the top of thermo-
stat housing.