Maintenance Chart - Can-Am outlander 400 series Operator's Manual

MAINTENANCE CHART

The maintenance is very important, if you are not familiar with safe service
practices and adjustment procedures, see your authorized Can-Am ATV
distributor/dealer.
A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
PART/TASK
ENGINE/TRANSMISSION
Engine/transmission oil level
Engine/transmission oil and filter
Engine/transmission oil strainer
Valve adjustment
Engine mounting fasteners
Air filter (2)
Exhaust system
Spark arrester
Condition of engine seals
Coolant (2)
Cooling system pressure test
Radiator condition/cleanliness
(radiating fins) (4)
Rewind starter rope condition
_____________________
116
PERIODIC MAINTENANCE CHART
INITIAL INSPECTION 10 H OR 30 DAYS OR 300 km (185 mi)
(To be performed by an authorized Can-Am ATV dealer. The initial maintenance is
very important and must not be neglected.)
25 H OR 750 km (470 mi)
50 H OR 1500 km (930 mi)
EVERY RIDE
(2)
R R
I,
A
I
C
(4)
I
I
I
I
I I
100 H OR 1 YEAR OR 3000 km (1865 mi)
200 H OR 2 YEARS OR 6000 km (3730 mi)
TO BE PERFORMED BY
Customer
Customer
C Dealer
I,
Dealer
A
I Dealer
R (2) Pre-ride inspection item.
Customer
(4) (3) Every 100 hours, check
I Dealer
(4) More often under severe use
C Customer
I Dealer
I
R Customer
(3)
I Dealer
Customer
I Dealer
LEGEND
coolant strength.
such dusty area, sand, snow,
wet or muddy conditions.