Symbol WS 2000 System Installation Manual page 17

3. Remove the backings from the four (4) rubber feet and stick them to the switch on the four
circles, as shown. The feet will be right next to the four plugs.
4. Return the switch to the upright position in the place that you wish it to sit, ensuring that it
is sitting evenly on all four rubber feet.
5. Connect the power supply to the wall outlet.
3.3.3 Wall Mounting
The wall mount bracket option secures the unit to most walls using the four screws included in the
mounting accessories box. The wall mounting accessories are sold separately from the wireless
switch (Part No. KT-MTG-WS-2000-WW).
1. Remove the protective rubber plugs from the switch as shown.
To snap into the wall mount bracket, the protective rubber plugs must be removed.
2. Using the screws and wall anchors supplied in the mounting accessories box, attach the
wall mount bracket to the wall as shown.
Installing the Branch Office Wireless System
Power Plug Connector
Rubber Plugs
17