Enable Subnet1 - Symbol WS 2000 System Installation Manual

Enable Subnet1

Select LAN under the Network Configuration group from the left menu. Use the LAN configuration
screen to view a summary of physical-port addresses and wireless LANs (WLANs) associated with
the four supported subnets, and to enable or disable each configured subnet.
1. In the LAN screen, the administrator can enable up to four subnets. Make sure that the
checkbox to the left of the Subnet1 line is enabled.
Each enabled subnet shows up in the directory tree in the left column of the configuration
screens. Consider disabling a previously configured subnet if its assigned ports are no longer
in use, or to consolidate the LAN's communications on fewer subnets.
The rest of the information on this screen is summary information— it is collected from other screens
(such as the subnet configuration screens) where the administrator can set the data.
Network Network (subnet) name is a descriptive string that should describe the subnet's
function. The WS 2000 Network Management System uses subnet names throughout
the configurations screens.
Configuring the WS 2000 Wireless Switch
31