Symbol WS 2000 System Installation Manual page 20

20 WS 2000 System Installation Guide
5. Attach the rack bezel to the bracket. To do this, tilt the bezel forward and place the T-shaped
tabs on the lower edge of the bezel just behind the lip on the front of the rack bracket. (You
will see two holes in the lip where they attach). Pull the bezel forward slightly and the T-tabs
should lock into place.
6. Using the remaining two screws provided in the mounting accessories box attach the bezel
to the rack bracket.
7. Connect the power supply to the wall outlet and turn on switch when appropriate.
3.3.5 Securing the Network Switch
The WS 2000 Wireless Switch comes with a lock port that is compatible with most locking systems.
The lock port is on the rear of the switch, opposite the power connector. In order to have clear access,
We suggest that you lock the wireless switch in place before you plug in WAN and LAN cables.
see Detail A
T-shaped tab
Detail A