Warnings - Symbol WS 2000 System Installation Manual

Table of Contents

Advertisement

3. Plug the wireless switch into the wall power socket.
4. Lock device to desk, wall, or rack using lock port on the switch.
5. Install Access Port in selected location using the instructions specifically for that location
type, found in
6. Plug in WAN and LAN (Access Port) connections to the switch and turn on switch.
7. See
Chapter 4, Configuring the WS 2000 Wireless Switch
configure the switch for your network and devices.

3.2 Warnings

Before installing and operating any equipment, review this document for any hazards
associated with installation and use of the device. Also, review standard practices for
preventing accidents.
• Only trained and qualified personnel should install this equipment.
• Read all installation instructions and site survey reports and verify correct equipment
installation before connecting the system to its power source.
• Remove any jewelry (rings, watches, necklaces, etc.) while installing this equipment.
• Install this equipment in racks with appropriate dimensions and weight allowances.
• Verify that racks are anchored and do not install in a way that can cause the equipment to
tip over and break away from its mountings. Damage to the devices or bodily injury can occur
from equipment that was not appropriately mounted and secured.
• Verify the unit is grounded before connecting to the power source. Connect all power cords
to a properly wired and grounded electrical circuit.
• Verify that any device connected to this unit is properly wired and grounded.
• Verify that connecting power circuits have appropriate overload protection.
• Attach only approved power cords and cables to the devices.
• Verify that the power connector is accessible at all times during the operation of the
equipment.
• Verify that the power circuit for the unit is grounded, can provide the required power, and is
not overloaded.
• Do not work with equipment power circuits in dimly lit spaces.
Section 3.4, Installing the AP 300 Access
Installing the Branch Office Wireless System
Port.
for information on how to
15

Advertisement

Table of Contents
loading

Table of Contents