Power Management - Wincor Nixdorf Beetle User Manual

Power Management

The BEETLE /iPRINT is delivered with activated energy conservation
function.
At delivery ex works the «Sleep Mode» is set to be activated after 30 min-
utes of inactive state, i.e. no inputs received from the user. At delivery ex
works the «Sleep Mode» for the Display Unit is set to be activated after 15
minutes of inactive state, i.e. no inputs received from the user. The WOL
functionality (Wake-on-LAN) is activated ex works (see page 40). The Wake-
on-USB and Wake-on-Timer functions can be enabled in BIOS setup.
Enter the BIOS setup as follows (monitor and keyboard connected):
- Switch the system on. When you see the text prompt "
<F2> to enter setup...
setup main menu and have access to the other setup menus. For further de-
tails see the extra manual for the BIOS setup. See:
nixdorf.com/internet/site_EN/EN/Support/Downloads/POSLotterySystems/M
anuals/BEETLE/BEETLE_node.html
The BEETLE /iPRINT's external power supply unit complies with EPS 2.0
and meets Efficiency Level V. This corresponds to an efficiency of at least
85%. That is good for the environment and cuts the cost of ownership.
The values given in the following table refer to a BEETLE /iPRINT with the
print unit in Sleep Mode.
BEETLE /iPRINT with
Intel Atom E660, 1,3 GHz
Off Mode
ACPI S5
Sleep Mode
ACPI S3
Idle State
ACPI S0
Active State
ACPI S0
18
" press one of these keys. You see the BIOS
Power Consumption (Watt)
Press <DEL> or
http://www.wincor-
< 2 W
< 5 W
~ 12 W
< 13 W
BEETLE /iPRINT User Manual