Storage Medium; Change The 2.5" Hard Disk/Ssd - Wincor Nixdorf Beetle User Manual

Storage Medium

As storage media the BEETLE /iPRINT can be equipped with either a 2.5"
SATA hard disk or a 2.5" Solid State Drive (SSD).

Change the 2.5" Hard Disk/SSD

First, ensure that the device is switched off and that the power connector of
the external power supply is disconnected.
If present, remove the Kensington lock.

Loosen and remove the screw (see red arrow) at the back side and

slightly pull out the hard disk (black arrow).
32
Kensington Lock
BEETLE /iPRINT User Manual