No Tes; Power Sypply Unit - Wincor Nixdorf Beetle/XL-I User Manual

Modular pos system
Table of Contents

Advertisement

Place the disc into the drawer with the discs label facing up. Then restore
the drawer softly until it is locked in the drive.

No tes

Never bend a disc.
Never write on a disc with the a hard object, like a ball-point pen or pencil
and never fix a label directly on the disc.
Do not expose discs to direct sunlight and avoid storing them in areas
subject to high temperatures or humidity.
Never touch the surface of the disc. Always handle by their edges.
For best results, periodically wipe each disc with a soft, dry cloth, gently
rubbing outward from center. Never use fluids such as petrol, record
cleaning or anti-static fluid. Use of such fluids can damage the disc.

Power Sypply Unit

The power supply unit automatically adjusts itself to the particular voltage.
The power output of the power supply unit is maximum 150 W or 212 W.
The power cord receptacle, and the ON/OFF switch are located on the back
of the BEETLE system. At the front side of the box you will find the ON/OFF
button which will turn on the system if the ON/OFF switch at the rear side is
in the position ON. Pushing the ON/OFF button (approx. 5 sec.) again will
turn the system into the standby mode.
POWER SYPPLY UNIT
29

Advertisement

Table of Contents
loading

Table of Contents