Headlamp Leveling - Ford EVEREST Owner's Manual

Note: Do not use the rear fog lamps when
it is raining or snowing.
Note: If you switch autolamps on, you can
only switch the fog lamps on once
autolamps has turned the headlamps on.

HEADLAMP LEVELING

Headlamp leveling is provided to avoid
glare for other road users when the vehicle
is loaded in a number of different
conditions.
To adjust the level of the headlamp
beams:
2
E132711
1. Press to release the control.
2. Rotate the control to the required
setting.
3. Press to close the control.
Set the headlamp leveling to the
corresponding setting, depending on the
vehicles loading condition.
Everest (TEC) , EB3B-19G219-EKB enAUS, CPE Review
Lighting
2
E206719
1
Set the headlamp leveling to the
corresponding switch setting, depending
on the vehicles loading condition.
Set the headlamp leveling control to zero
when your vehicle is unloaded.
55
0
0
1
1
2
3