Ford EVEREST Owner's Manual page 271

Note: When an MP3 CD is playing, you can
have the system repeat the current track or
all tracks within the current folder. Pressing
function button 1 toggles these options.
Compact Disc Track Scanning
The Scan function allows you to preview
each track for approximately 8 seconds.
Type 1
Press CD to select CD MODE.
Short press SCAN button to scan CD.
Note: When an MP3 CD is playing, you can
have the system scan tracks on the CD or
within the current folder. Pressing
SCAN/AS button toggles these options.
Type 2
Various scan modes are possible,
according to the type of CD currently
playing.
Press the MENU button and select CD
MODE.
Select SCAN, which then enables the
function to be selected on or off.
Note: When an MP3 CD is playing, you can
have the system scan tracks on the CD or
within the current folder. Pressing OK button
toggles these options.
Type 3
Press function button 3.
Note: When an MP3 CD is playing, you can
have the system scan tracks on the CD or
within the current folder. Pressing function
button 3 toggles these options.
MP3 File Playback
MP3 (MPEG 1 Audio Layer-3) is a standard
technology and format for compressing
audio data. This allows a more efficient
use of the media.
Everest (TEC) , EB3B-19G219-EKB enAUS, CPE Review
Audio System
You can play MP3 files recorded on
CD-ROM, CD-R and CD-RW formats. The
disc must be in the ISO 9660 level 1 or level
2 format, or Joliet or Romeo in the
expansion format. You can also use a disc
recorded in multi session.
ISO 9660 Format
This is the most common international
standard for the logical format of files and
folders on a CD-ROM.
There are several specification levels. In
Level 1, file names must be in the 8.3
format (no more than eight characters in
the name, no more than three characters
in the extension MP3 and WMA) and in
capital letters.
Folder names can be no longer than eight
characters. There can be no more than
eight folder levels (trees). Level 2
specifications allow file names up to 31
characters long.
Each folder can have up to eight trees.
For Joliet or Romeo in the expansion
format, consider these restrictions when
configuring your CD writing software.
Multi Session
This recording method enables adding of
data using the track-at-once method.
Conventional CDs begin at a CD control
area called the lead-in and end at an area
called lead-out. A multi session CD is a CD
having multiple sessions, with each
segment from lead-in to lead-out regarded
as a single session.
CD-Extra: The format that records audio
(audio CD data) as tracks on session 1, and
records data as tracks on session 2.
Mixed CD: In this format, data records as
track 1 and audio (audio CD data) records
as track 2.
269