Ford EVEREST Owner's Manual page 192

Connecting the Jumper Cables
A
C
E102925
A Flat battery vehicle.
B Booster battery vehicle.
C Positive connection cable.
D Negative connection cable.
WARNING
Do not let the vehicles come into
contact when using booster cables.
1. Position the vehicles in a suitable
arrangement to connect the booster
cables.
2. Switch off the engine and any electrical
equipment.
Everest (TEC) , EB3B-19G219-EKB enAUS, CPE Review
Roadside Emergencies
D
B
190
3. Connect the positive (+) terminal of
vehicle B with the positive (+) terminal
of vehicle A (cable C).
E205764
WARNINGS
Do not connect directly to the
negative (–) terminal of the flat
battery.
Make sure that the cables are clear
of any moving parts and fuel delivery
system parts.
4. Connect the negative (-) terminal of
vehicle B to the ground connection of
vehicle A (cable D).
To Start the Engine
WARNING
Do not switch the headlamps on
when disconnecting the cables. The
peak voltage could blow the bulbs.
1. Run the engine of vehicle B at a
moderately high speed.
2. Start the engine of vehicle A.
3. Run both vehicles for a minimum of
three minutes before disconnecting the
cables.