Audio Unit Clock And Date Displays - Ford EVEREST Owner's Manual

AUDIO UNIT CLOCK AND DATE
DISPLAYS
Changing the Time
The clock can be set at any time when the
system is in the one hour mode or the
ignition switch is in the ACC or ON position.
Note: Vehicles with AM/FM/DAB/CD: The
time can be adjusted using the hour and
minute buttons on the screen.
To advance the hours, press the HOUR
SET button. To advance the minutes, press
the MINUTE SET button while the time is
flashing.
Note: Vehicles with Bluetooth/NAV: The
time can be adjusted using the clock button
on the audio control panel.
Note: The time can be adjusted using the
cursor arrow buttons on the audio control
panel.
Vehicles with
AM/FM/DAB/USB/Bluetooth
1. Press the MENU button.
2. Use the up and down arrow button to
select the clock settings.
3. Short press the OK button or right
arrow button to enter the clock
settings.
4. Use the up and down arrow button to
select the set time.
5. Use the up and down arrow button to
adjust hours.
6. Use the right and left arrow button to
scroll to the minutes.
7. Use the up and down arrow button to
adjust minutes.
8. Use the OK button to save the settings.
Vehicles with AM/FM/DAB/CD/SYNC
1. Press the MENU button.
Everest (TEC) , EB3B-19G219-EKB enAUS, CPE Review
Audio System
2. Use the up and down arrow button to
select the clock settings.
3. Press OK button or right arrow button
to enter clock settings.
4. Use the up and down arrow button to
select the set time.
5. Use the up and down arrow button to
adjust hours.
6. Use the right and left arrow button to
scroll to the minutes.
7. Use the up and down arrow button to
adjust minutes.
8. Use the OK button to save the settings.
Vehicles with AM/FM/DAB/CD/SYNC
2
See Settings (page 322).
Exact Hour Adjustment
You can set the time to the beginning of
an hour using this feature.
• Press the CLOCK button for about two
seconds until a beep is heard. The
clock's current time will flash.
• Press the CLOCK button again and the
time will be adjusted as follows:
Example
• Current set time between 12:01 and
12:29 will change to 12:00 exactly.
• Current set time between 12:30 and
12:59 will change to 1:00 exactly.
Note: If the power supply to the unit is
interrupted (if the fuse blows or the vehicle's
battery is disconnected), the clock will need
to be reset.
267