Ford EVEREST Owner's Manual page 28

WARNINGS
Care should be taken to avoid
contamination of the webbing with
polishes, oils and chemicals, and
particularly battery acid. Cleaning may
safely be carried out using mild soap and
water. The belt should be replaced if
webbing becomes frayed, contaminated
or damaged.
It is essential to replace the entire
assembly after it has been worn in a
severe impact even if damage to the
assembly is not obvious.
Never use a seatbelt for more than
one person. It is dangerous to put a
belt around a child being carried on
the occupant's lap.
Belts should not be worn with straps
twisted.
Do not make any modifications or
additions to the seatbelt as it may
either prevent the seatbelt adjusting
devices from operating to remove slack,
or prevent the seatbelt assembly from
being adjusted to remove slack.
E74124
Everest (TEC) , EB3B-19G219-EKB enAUS, CPE Review
Seatbelts
2nd Row seat
E200940
3rd Row seat
E200941
Pull the seatbelt out steadily.It may lock if
you pull it sharply or if your vehicle is on a
slope.
The 2nd row center seatbelt can lock if you
return the seat back from a folded position
to the upright position forcefully. Should
the seatbelt lock, recline the seat using the
recline adjustment. See Rear Seats (page
109).
26