Everest (Tec) , Eb3B-19G219-Ekb Enaus, Cpe Review - Ford EVEREST Owner's Manual

Hide thumbs Also See for EVEREST:

Table of Contents

Adjusting Pre-Collision Assist Settings

You can adjust the Pre-Collision Assist and

Distance Alert sensitivity to one of three

possible settings by using the information

display control. See General Information

You can switch the distance alert and

indication function off using the

information display controls. See General

Information (page 72).

Everest (TEC) , EB3B-19G219-EKB enAUS, CPE Review

Driving Aids

Distance Gap

between 17m and

Blocked Sensors

If a blocked sensor message appears in the

information display, dirt, water, or an object

is blocking the sensor. The sensor is

located behind a cover near the driver side

of the lower grille. If anything blocks the

sensor, your vehicle cannot see through

the sensor, and the pre-collision assist

system will not work. Possible causes for

the blocked sensor message and corrective

actions are listed below.