Ford EVEREST Owner's Manual page 261

Part
Front axle oil
Rear axle oil
Transfer case oil
Air conditioning refrigerant
Air conditioning Compressor
lubricant
*
For markets with low sulphur content (less than 350 ppm)
**
For markets with high sulphur content (more than 350 ppm)
***
See your authorised dealer.
Your engine has been designed to be used
with Ford Engine Oil, which gives a fuel
economy benefit whilst maintaining the
durability of your engine.
Topping up the oil:
Engine oil - Diesel (for markets with
low sulphur content less than 350
ppm): If you are unable to find an oil that
meets the specification defined in the
vehicle fluids table, you must use SAE
5W-30 that meets the specification
defined by ACEA A5/B5.
Capacities
Variant
2.0 Ecoboost
2.0 Ecoboost
2.2L Duratorq-TDCi
2.2L Duratorq-TDCi
3.2L Duratorq-TDCi
3.2L Duratorq-TDCi
Everest (TEC) , EB3B-19G219-EKB enAUS, CPE Review
Capacities and Specifications
Recommended fluid
Motorcraft MERCON® LV
POLYALKYLENE GLYCOL
-
-
R134A
Engine oil - Diesel (for markets with
high sulphur content greater than 350
ppm): If you are unable to find an oil that
meets the specification defined in the
vehicle fluids table, you must use SAE
10W-30 that meets the specification
defined by API CH-4.
Using topping up oils other than the one
specified can result in longer engine
cranking periods, reduced engine
performance, reduced fuel economy and
increased emission levels.
Item
Engine oil with filter
Engine oil without filter
Engine oil with filter
Engine oil without filter
Engine oil with filter
Engine oil without filter
259
Specification
WSP-M2C197-A
***
-
WSS-M2C938-A (XT-10
QLV)
WSH-M17B19-A
WSH-M1C231-B
Capacity
5.2 L
-
8.6 L
-
9.75 L
-