Table of Contents
Advertisement
The jack, wheel brace, and winch extension
tool are located in the stowage
compartment under the rear floor.
2
E206399
1.
Lift the stowage bin lid.
2. Remove the locking strap and remove
the tools.
3. Rotate the retaining nut and remove
the jack.
Spare Wheel
WARNINGS
If the spare wheel is not the same
type and size as your vehicle road
wheel, drive the shortest distance
possible.
Do not fit more than one spare wheel
on your vehicle at any one time.
The spare wheel has a label showing
the maximum driving speed. Drive
with caution and at no more than the
permitted maximum speed.
The usage of a dissimilar spare wheel
or tyre at any one wheel location can
lead to impairment of the Handling,
Stability and Braking Performance,
Comfort and Noise.
Everest (TEC) , EB3B-19G219-EKB enAUS, CPE Review
Wheels and Tires
Note: The spare wheel is located
underneath the rear of the vehicle.
1.
2. Lower the third row seat-back to assist
1
E206440
3. In the rear storage compartment, lift
4. Insert the assembled wheel brace and
248
Assemble the wheel brace and the
winch extension tool.
spare wheel winch operation. See
Rear Seats (page 109).
3
rubber cover to expose wheel winch.
winch extension tool into the guide
hole and make sure it locates correctly.
Turn the wheel brace
counter-clockwise until the spare
wheel lowers from underneath the
vehicle and rests on the ground, and
there is slack in the cable.
2
Advertisement
Table of Contents
Troubleshooting
