3. Remove the handle by unscrewing the
two screws using a standard cross tip
screw driver.
4. Remove the lift gate inner trim panel
to access the reverse lamp
5. Remove the bulb socket from the lamp
assembly by turning it
counterclockwise.
6. Remove the bulb by gently pulling it
from the socket.
Install the new bulb in reverse order.
Replacing the Rear Fog Lamp Bulb
1
E206200
1.
Remove the bulb socket from the lamp
assembly by turning it
counterclockwise.
2. Remove the bulb by gently pulling it
from the socket.
Install the new bulbs in reverse order from
the steps above.
BULB SPECIFICATION CHART
Bulb
Headlamp low beam.
Everest (TEC) , EB3B-19G219-EKB enAUS, CPE Review
Maintenance
Specification
+
Replacing the License Plate Lamp
Bulb
Type 1
3
E72789
1.
Carefully release the spring clip.
2. Remove the lamp.
3. Remove the bulb.
Type 2
E133687
1.
Remove the screws.
2. Remove the lamp lens.
3. Remove the bulb.
H7
233
2
1
3
2
1
Power ( Watts)
55