HEADLAMP LEVELING
You can adjust the level of the headlamp
beams according to the vehicle load. Turn
the thumbwheel downward to lower the
beams and upward to raise them
Note: Set the control to zero when your
vehicle is unloaded.
Note : Set the headlamp beams to give
between 35–100 m of road surface
illumination when your vehicle is partially
or fully loaded.
DIRECTION INDICATORS
Push the lever up or down to use the
direction indicators.
Note: Tap the lever up or down to make
the direction indicators flash three times
to indicate a lane change.
Territory (CF4) Philippines, Vehicles Built From: 25-05-2020, EN, First Printing
Lighting
INTERIOR LAMPS
The lamps turn on under the following
conditions:
•
You open any door.
•
You press a remote-control button.
•
You press button A on the front interior
lamp.
Front Interior Lamps
B
A
A
Individual map lamps
B
All lamps on / off
C
Door function
Note: The front interior lamp switches are
on the overhead console. The exact
location of each button on the overhead
console depends upon your vehicle
features.
Note: Press the button to switch the door
function off when you open any door.
When the door function is off and you
open a door, the courtesy and door lamps
stay off. The indicator lamp lights amber
when the door function is off.
Note: Press the button again to switch
the door function back on. When the door
function is on and you open a door, the
courtesy and door lamps turn on. The
indicator lamp lights blue when the door
function is on.
44
C
A