Ford EVEREST Owner's Manual page 45

• Use the liftgate release switch.
• Manually close the liftgate
E206131
The liftgate will close automatically when
it comes into contact with the vehicle body.
Programming Liftgate Height
You can set the power liftgate height as
desired by following the below steps.
1. Open the liftgate.
2. Manually move the liftgate to the
desired height.
3. Press and hold the liftgate switch for
at least three seconds. A tone sounds
when the desired height has been set.
Everest (TEC) , EB3B-19G219-EKB enAUS, CPE Review
Locks
43