Manually Overriding the System
E169254
Push or pull the lever to switch between
high and low beam.
Note: This is a temporary override and the
system will return to automatic operation
after a short period.
To permanently switch the system off, use
the information display menu or turn the
lighting control switch to the headlamps
position.
DAYTIME RUNNING LAMPS
WARNING
Always remember to switch your
headlamps on in low light situations
or during inclement weather. The
system does not activate the tail lamps
and may not provide adequate lighting
during these conditions. Failure to activate
your headlamps under these conditions
may result in a collision.
To switch the system on:
1.
Switch the ignition on.
2. Switch the lighting control to the off or
autolamp position.
Everest (TEC) , EB3B-19G219-EKB enAUS, CPE Review
Lighting
FRONT FOG LAMPS
E132709
Press the control to switch the fog lamps
on or off.
You can switch the fog lamps on when the
lighting control is in any position except
off.
Note: Only use fog lamps during reduced
visibility, for example, fog, snow or heavy
rain.
REAR FOG LAMPS
E132710
Press the control to switch the fog lamps
on or off.
You can only switch the rear fog lamps on
when either the front fog lamps or low
beam headlamps are on.
Note: Only use the rear fog lamps when
visibility is less than 50 m.
54