Audio Unit Clock And Date Displays; Setting The Clock And Date On The Audio Unit; Changing The Date And Time - Ford Transit Owner's Manual

Audio Unit Clock and Date Displays

SETTING THE CLOCK AND
DATE ON THE AUDIO UNIT
6000CD and 6006CDC

Changing the date and time

Press the CLOCK button to display the
date and time.
Note: If you do not press another button
within 30 seconds of pressing the CLOCK
button, the display will return to its previous
setting.
1. Using the seek up or seek down button
select the date or time value that you
wish to change. The selected value will
flash in the display.
2. Rotate the volume control to change
the selected date or time value.
3. Using the seek up or seek down button
select additional date or time values
that you wish to change.
4. Rotate the volume control to change
the selected date or time value.
5. Press the CLOCK button to exit and
save your settings.
Note: If you do not press the CLOCK button
within 30 seconds of changing a date or
time value, the display will exit and save the
new values automatically.
Note: Press and hold the CLOCK button
for more than two seconds to automatically
select the hour value for winter or summer
time adjustment.
12/24 hour format
1. Press the MENU button repeatedly
until the 12/24 icon is shown in the
display.
2. Using the seek up or seek down button
select your required setting.
3. Press the MENU button repeatedly or
allow the system to time out to confirm
your selection.
Transit (TT9) Vehicles Built From: 26-09-2011, Vehicles Built Up To: 31-12-2013
Sony CD
Changing the date and time
1. Press the CLOCK button.
2. Press the left or right navigation button
until the date or time value that you
wish to change flashes in the display.
3. Using the up or down navigation button
change the selected date or time value.
4. Using the left and right navigation
buttons select additional date or time
values that you wish to change. The
selected value will flash in the display.
5. Repeat steps three and four as
necessary.
6. Press the CLOCK button or the button
between the navigation buttons to exit
and save your settings.
12/24 hour format
1. Press the MENU button.
2. Press the up or down navigation button
until the 12/24 icon is shown in the
display.
3. Using the left or right navigation button
select the required setting.
4. Press the MENU button or the button
between the navigation buttons to
confirm your selection.
186