MAINTENANCE WORK ON CHASSIS AND ENGINE
Rear frame position
9.75
–
Mount and tighten the screw.
Guideline
Remaining chassis screws
–
Tighten the screw.
Guideline
Screw, handlebar stub
–
Repeat the adjustments on the other handlebar stub.
–
Move the handlebar to and fro over the entire steering range.
»
If the cables restrict the freedom of movement of the steering:
–
Correct the cable routing.
700362-01
The frame rear height can be set to two different positions, enabling ergonomic adjustment
of the seat height.
Seat height
Seat height
400439-10
(standard)
805 mm (31.69 in)
825 mm (32.48 in)
M5
5 Nm (3.7 lbf ft)
M8
20 Nm
(14.8 lbf ft)
181