KTM 1190 RC8 Owner's Manual page 187

MAINTENANCE WORK ON CHASSIS AND ENGINE
–
Tighten screw
Guideline
Screw, subframe
700327-13
–
When you screw in the rear left fixing screw, the plug-in cable binder
of the thread. To reposition the cable of the lambda probe, fix the plug-in cable binder
in the remaining free drill hole.
Info
Check the cable routing. The cable of the lambda probe should not be taut.
700338-01
on the left and right sides of the vehicle.

M8 20 Nm Loctite ® 243™
(14.8 lbf ft)
is pushed out

185