Adjusting The Gas Bowden Cable; Handlebar Height - KTM 1190 RC8 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Adjusting the gas Bowden cable

9.72

Handlebar height

9.73
x
–
Move the handlebar to the straight-ahead position.
–
Use the KTM diagnostics tool to set the throttle stepper motor to the neutral position.
–
Loosen counter nut
–
Adjust the gas Bowden cable with adjusting screw
Guideline
Play in gas Bowden cable
–
Tighten counter nut
700317-01
By removing or inserting the spacing sleeves
different positions.
Long distance sleeve
With distance sleeves, the handlebar stub is positioned low for sports use. Removing the
distance sleeves gives a more upright sitting position.
Standard
700319-12
.

3... 5 mm (0.12... 0.2 in)
.

, you can set the handlebar height at two

15 mm (0.59 in)

Low position with distance sleeve
.

178